Lotos Supreme LTP5500DCNC Non-Touch Pilot Arc CNC Enabled Digital Plasma Cutter THC Torch Height Control Enabled, Dual Voltage 110V/220V, 3/5 inch Clean Cut, Brown (55AMP CNC)
genuine image
Lotos Supreme LTP5500DCNC Non-Touch Pilot Arc CNC Enabled Digital Plasma Cutter THC Torch Height Control Enabled, Dual Voltage 110V/220V, 3/5 inch Clean Cut, Brown (55AMP CNC)
PORTABLE and POWERFUL--The LTP5500D can easily cut 3/5” (15 mm) metal with ultimate portability weighing only 15lbs; Non-HF--Non-HF Blowback Start, there is no HF interference; CNC ENABLED Pre-installed CNC Interface with THC (Torch Height Controller) signal output; SETUP WITHIN 1 MIN--the per-installed NPT 1/4” industry type D plug and air filter regulator allow you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The Non-HF start 14ft torch with central connector saves your time to connect the torch to your plasma cutter; INPUT: Automatic Dual Voltage 110~125V or 215~245V; OUTPUT: 20-55 A DC output, 3/5” ideal clean cut and 1” maximum severance cut under 220/240V. 20-35A DC output, 3/8" ideal clean cut and 1/2" maximum severance cut under 110/120V; SUITABLE CUTTING--Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
Lotos Supreme LTP5500DCNC Non-Touch Pilot Arc CNC Enabled Digital Plasma Cutter THC Torch Height Control Enabled, Dual Voltage 110V/220V, 3/5 inch Clean Cut, Brown (55AMP CNC)
商品＃: 92581152

Lotos Supreme LTP5500DCNC Non-Touch Pilot Arc CNC Enabled Digital Plasma Cutter THC Torch Height Control Enabled, Dual Voltage 110V/220V, 3/5 inch

回答者の86%がこの商品を友人に勧めたいと回答

商品＃: 92581152

JPY 169105

価格の詳細

配送料と関税を除く ( 配送料と関税は購入手続き時に計算されます )

*すべての商品は英国から輸入されます

在庫あり
英国 UK ストアからの輸入品
今すぐ注文すると 頃に届きます 火曜日, 9月 08
安全な取引安全な取引

Ubuyはお客様のセキュリティとプライバシーの保護に努めています。当社の高度な決済セキュリティシステムは、AES（高度暗号化標準）およびSSL（セキュアソケットレイヤー）プロトコルを使用して送信中の情報を暗号化することで機密性を確保しています。お客様の決済情報は第三者の販売者と共有されることはなく、100%安全に保護されています。

最高の物流パートナー
  • fedex
  • dhl
PORTABLE and POWERFUL--The LTP5500D can easily cut 3/5” (15 mm) metal with ultimate portability weighing only 15lbs; Non-HF--Non-HF Blowback Start, there is no HF interference; CNC ENABLED Pre-installed CNC Interface with THC (Torch Height Controller) signal output; SETUP WITHIN 1 MIN--the per-installed NPT 1/4” industry type D plug and air filter regulator allow you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The Non-HF start 14ft torch with central connector saves your time to connect the torch to your plasma cutter; INPUT: Automatic Dual Voltage 110~125V or 215~245V; OUTPUT: 20-55 A DC output, 3/5” ideal clean cut and 1” maximum severance cut under 220/240V. 20-35A DC output, 3/8" ideal clean cut and 1/2" maximum severance cut under 110/120V; SUITABLE CUTTING--Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
fast shipping

Fast
Shipping

free return

Free
Return*

安全な梱包

安全な梱包

100％正規品

100％正規品

pci-dss

PCI DSS 準拠

iso certified

ISO 27001認証取得

paypal payment
visa payment
mastercard payment
american express payment
jcb payment
Note: Step Up Voltage Transformer required for using electronics products of 英国 store (230 V). Recommended power converters 今すぐ購入.

この商品の利点

Advanced CNC Functionality
Equipped with CNC capabilities, this plasma cutter allows for precision cutting and automation, solving complex tasks effortlessly while enhancing productivity for professional welders and fabricators.
Dual Voltage Operation
Versatile dual voltage of 110V/220V ensures compatibility with diverse power sources, offering flexibility and convenience for various workshop settings while maintaining efficient performance.
Height Control Technology
Innovative THC technology automatically adjusts torch height, ensuring optimal cut quality and preventing damage, which significantly improves user experience and operational efficiency in cutting projects.

製品詳細

Shop Lotos Supreme LTP5500DCNC Non-Touch Pilot Arc CNC Enabled Digital Plasma Cutter THC Torch Height Control Enabled, Dual Voltage 110V/220V, 3/5 inch Clean Cut, Brown (55AMP CNC) online at a best price in 日本. B07Y3Y12VF

どんな人にお勧めですか？

Suitable For
  • CNC Enthusiasts

    Ideal for users who want precision cutting with CNC capabilities and enhanced control over the cutting process.

  • Metal Fabricators

    Perfect for professionals in metal fabrication requiring clean cuts in various metals with flexibility in voltage.

  • Hobbyist Welders

    Great for hobbyists needing a reliable plasma cutter for personal projects, providing high-quality cuts without extensive training.

Not Suitable For
  • Beginners

    Not suitable for inexperienced users due to its advanced features and the necessary skill to utilize effectively.

製品説明書

Lotos Supreme LTP5500DCNC Non-Touch Pilot Arc CNC Enabled Digital Plasma Cutter THC Torch Height Control Enabled, Dual Voltage 110V/220V, 3/5 inch Clean Cut, Brown (55AMP CNC)

何か質問はありますか？ チャットでお問い合わせください

お客様の質問と回答

  • 質問: What is the weight of Lotos Supreme LTP5500DCNC?

    回答: The Lotos Supreme LTP5500DCNC is extremely portable and weighs only 15lbs.
  • 質問: What types of materials can be cut by this plasma cutter?

    回答: The Lotos Supreme LTP5500DCNC can cut Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, and other metals.
  • 質問: What is the output and input voltage of this plasma cutter?

    回答: The input voltage is automatic dual voltage 110-125V or 215-245V and the output voltage ranges from 20-55A DC output, with 3/5” ideal clean cut and 1” maximum severance cut under 220/240V.

LOTOS Editorial Review

The Lotos Supreme LTP5500DCNC Non-Touch Pilot Arc CNC Enabled Digital Plasma Cutter has garnered a mixed reception from users, with a notable majority praising its performance while a small number have experienced issues. Many reviewers highlight its incredible value, especially for a CNC-capable, dual-voltage unit, often comparing it favorably to much more expensive brands such as Hypertherm. Users have reported excellent cutting capabilities, with some noting that it even surpasses their previous machines in terms of performance when cutting metal up to 1/4 inch thick. One of the standout features mentioned is the ability to operate effectively at both 110V and 220V, making it versatile for different working environments. Customers also appreciate the minimal cleanup after cutting, suggesting that the precision and efficiency of the cutter contributes to an overall pleasant user experience. However, not all feedback has been positive. A few users reported technical issues such as inConsistent arc performance and insufficient cutting power when attempting to work with thicker materials. The frustration was compounded by some experiences with customer service, where users found support lacking—particularly regarding technical assistance and the initial setup guidance. On the whole, customer experiences with the Lotos LTP5500DCNC are predominantly favorable, especially for individuals seeking a reliable plasma cutter without breaking the bank. As with any product, potential buyers should weigh the Pros and Cons and Consider their specific needs for metal cutting. **

お客様のレビュー＆評価

1 カスタマー評価
  • 5 星
    0%
  • 4 星
    100%
  • 3 星
    0%
  • 2 星
    0%
  • 1 星
    0%

この商品のレビュー

お考えをお聞かせください

長所

  • Excellent value for a CNC-capable plasma cutter
  • Dual voltage (110V/220V) for versatile use
  • Impressive cutting performance, especially on materials up to 1/4 inch thick
  • Minimal cleanup required after cutting
  • Positive support experiences for some users

短所

  • InConsistent arc performance reported by a few users

プラットフォームの信頼性とお客様の安心

trustpilot logo
4.2/5 9250 + reviews
レビューを読む
MA
Mohammad
Verified buyer

“Excellent quality and original too,when ubuy send original things I will appreciate that ,I very satisfied thank you”

23 July 2026 · via Trustpilot
CK
Chitra
Verified buyer

“The order and delivery progress was communicated very well. Package arrived within the estimated time. Products arrived as expected in good condition.”

22-Jul-26 · via Trustpilot
K
kund
Verified buyer

“Good supply of products. Safe payment methods, and shipment worldwide! Genuine products.”

23-Jul-26 · via Trustpilot
OO
Onesi
Verified buyer

“Was my first time buying a product from Ubuy, but I found it so helpful. This is reliable. Gonna place a new order!”

22 July 2026 · via Trustpilot
SJ
SAO JOHN
Verified buyer

“Ubuy is a great online platform to buy stuff. Reliable, fast delivery time and great value for money. I've been using Ubuy online shopping platform for three years now and will continue to do so.”

23 July 2026 · via Trustpilot
安全な決済 国際配送 簡単返品 正規品保証

価格推移

重要な情報

  • 注意：国際運送の商品に関して、製造会社保障は無効になる可能性、アフターサービスは受けれない可能性、取説や安全情報は発送先の言語になっていない可能性ある。商品とその付属品は配送先の国の規格、仕様、ラベル表示法などに適応していない可能性があります。また、配送先の国の電力企画に適応しいない（アダプタや変換器を必要とする）可能性があります。ご注文の商品は配送先の国に輸入することは合法なのかを確認するのは購入者の責任になります。Ubuyからご購入の際、受け取り者は正式な輸入者となり、配送先の全ての法律やルールに遵守する必要があります。
  • Ubuyはグローバル検索エンジンのためリストにある全ての商品が購入できないことがあります。商品は輸出規制、貿易規制があります。

JPY 169105

今すぐ注文すると 頃に届きます 火曜日, 9月 08

数量：

安全な取引安全な取引

PCI DSS準拠・ISO 27001:2022認証取得。すべてのご注文に暗号化決済と充実したバイヤープロテクションが適用されます。

最高の物流パートナー
  • fedex
  • dhl
最速の国際配送

特徴と利点

  • Portable & Powerful
  • Non-HF Start
  • CNC Enabled
  • Quick & Easy Setup
  • Dual Voltage Input
  • Suitable Cutting

Ubuyの安心保証

100％正規品、PCI DSS準拠の決済セキュリティ、ISO 27001認証のデータ保護、最速の国際配送、無料返品※、安全な梱包をすべてのご注文でお届けします。